Juno Tracker Cellular NFC and downlink description

📄 You can view the PDF above or download it here .

Below is an overview of NFC and downlink configuration options available for the JUNO NBM1 devices. For additional modules and generic guidance, please consult the LoRaWAN® or mioty® documentation.

NFC Configuration Modules

Module	Module Key	Group	Group ID	Description
Juno	0x1XXX	Timings	0x00	Defines parameters for measurements and transmission behavior
Juno	0x1XXX	Alarms and limit values	0x01	Defines alarms and limit values, e.g. upper temperature limit and lower temperature limit
Juno	0x1XXX	Tracking on Activity	0x04	Defines measurement thresholds for triggering the Tracking on Activity feature and other settings for tracking

ℹ️ Tables for cross-product modules can be found in the Generic NFC and Downlink documentation.
Further information on the configuration of sensor communication and tracking settings can be found in the respective generic LoRaWAN® or mioty® documentation, depending on the version.

Applicable Article Codes

Article Code	Features
S-JUNO-NBM1-TH-TRACK-X	JUNO TH Tracker, temperature and relative humidity with tracking function and Tracking on Activity Cellular
S-JUNO-IX-NBM1-TH-TRACK-X	INDUSTRIAL JUNO TH Tracker, temperature and relative humidity with tracking function and Tracking on Activity Cellular
S-JUNO-NBM1-TRACK-X	JUNO Tracker with Tracking on Activity Cellular
S-JUNO-IX-NBM1-TRACK-X	INDUSTRIAL JUNO Tracker with Tracking on Activity Cellular

Instructions valid for versions above.

JUNO: GROUP TIMINGS 0x00

Resource	ID	Key (NFC/BLE)	Min	Max	Factory setting	Unit	Module key
MEASUREMENT PERIOD	0x00	period	1/5*	360	30	min	1111
Specifies the period in which the measured values are recorded. 5 minutes means that a measurement is always taken by the sensor after 5 minutes.
REGULAR TRANSMISSION INTERVAL	0x01	every	1	64	6		1111
Number of measurements performed up to transmission.

* 5: For version S-JUNO-XXXX and S-JUNO-XXXX
* 1: For version S-JUNO-IX-XXXX and S-JUNO-IX-XXXX

JUNO: GROUP ALARM SETTINGS 0x01

Resource	ID	Key (NFC/BLE)	Min	Max	Factory setting	Unit	Module key
ALARM ACTIVE	0x00	alarm_act	0	3	1		1111
Indicates which alarms are activated, whether for temperature or relative humidity: • 0: Both alarms deactivated • 1: Temperature alarm active • 2: Rel. humidity alarm active • 3: Both alarms active
TEMPERATURE DELTA	0x01	tdt	1	50	5	°C	1111
Specifies by how much the temperature must change in absolute terms compared to the last transmission for an ALARM transmission to be triggered. This transmission is carried out independently of the normal transmission interval.
TEMPERATURE UPPER LIMIT	0x02	tht	0	85	40	°C	1111
Specifies the upper absolute limit value at which an alarm is triggered.
TEMPERATURE LOWER LIMIT	0x03	tlt	-25	75	0	°C	1111
Specifies the lower absolute limit value at which an alarm is triggered.
REL. HUMIDITY DELTA	0x04	hdt	1	80	20	%RH	1111
Specifies by how much the relative humidity must change in absolute terms compared to the last transmission for an ALARM transmission to be triggered. This transmission is carried out independently of the normal transmission interval.
REL. HUMIDITY UPPER LIMIT VALUE	0x05	hht	5	100	80	%RH	1111
Specifies the upper absolute limit value at which an alarm is triggered.
REL. HUMIDITY LOWER LIMIT VALUE	0x06	hlt	0	95	20	%RH	1111
Specifies the lower absolute limit value at which an alarm is triggered.
HYSTERESE REL. AIR FLUID	0x07	thy	5	0	30	°C	1111
Determines the absolute hysteresis in °C for state changes. If the temperature falls below or exceeds a threshold value minus hysteresis, the system switches from a higher to a lower alarm status.
HYSTERESIS TEMPERATURE	0x08	hhy	2	0	10	%RH	1111
Determines the absolute hysteresis in %RH for status changes. If the relative humidity falls below or exceeds a threshold value minus hysteresis, the system switches from a higher to a lower alarm status.

JUNO: GROUP TRACKING ON ACTIVITY SETTINGS 0x04

Resource	ID	Key (NFC/BLE)	Min	Max	Factory setting	Unit	Module key
MOVE MODE	0x00	lmode	0	7	6		1111
Indicates whether Tracking on Activity mode is activated: • 0: No Tracking on Activity feature active • 1: Tracking on Start: Localization is carried out when an activity is detected. • 2: Tracking on Ongoing: Localization is carried out during an ongoing activity. • 3: Tracking on Start and Ongoing: Localization is carried out when an activity is detected and while an activity is already running. • 4: Tracking on Inactivity: When an activity is finished, localization is carried out. • 5: Tracking on Start and Inactivity: Localization is carried out when an activity is detected and when an activity ends. • 6: Tracking on Inactivity and Ongoing: Localization takes place when the activity is in progress and the activity has ended. • 7: Tracking on Start, Inactivity and Ongoing: Localization takes place when the activity starts, is in progress and the activity has ended.
MOVE ACTIVITY THRESHOLD	0x01	moat	100	2000	400	mg	1111
Describes the acceleration from which an activity is counted and recorded as an activity.
MOVE ONGOING TIME	0x02	mont	1	1440	10	min	1111
Specifies the time that elapses between two transmissions and localizations while an activity is ongoing.
MOVE INACTIVITY TIME	0x03	moit	1	1440	5	min	1111
Describes the time between the point at which an activity ends and the localization/transfer of the data.
MOVE IMPACT MAX	0x04	miom	1	1440	4		1111
Number of impacts. If this count is reached before "Move Inactivity Time" expires between impacts, a vandalism alarm is triggered.

Plain Text Information

Group: Timings (0x00)
Defines parameters for measurements and transmission behavior.

Resource: MEASUREMENT PERIOD
ID: 0x00
Key (NFC/BLE): period
Min value: 1/5*
Max value: 360
Default value: 30W
Unit: min
Module key: 1111
Description: Specifies the period in which the measured values are recorded. 5 minutes means that a measurement is always taken by the sensor after 5 minutes.

Resource: REGULAR TRANSMISSION INTERVAL
ID: 0x01
Key (NFC/BLE): every
Min value: 1
Max value: 64
Default value: 6
Unit: —
Module key: 1111
Description: Number of measurements performed up to transmission.

Group: Alarm Settings (0x01)
Defines alarms and limit values for temperature and relative humidity.

Resource: ALARM ACTIVE
ID: 0x00
Key (NFC/BLE): alarm_act
Min value: 0
Max value: 3
Default value: 1
Unit: —
Module key: 1111
Description: Indicates which alarms are activated:
• 0: Both alarms deactivated
• 1: Temperature alarm active
• 2: Rel. humidity alarm active
• 3: Both alarms active

Resource: TEMPERATURE DELTA
ID: 0x01
Key (NFC/BLE): tdt
Min value: 1
Max value: 50
Default value: 5
Unit: °C
Module key: 1111
Description: Specifies by how much the temperature must change in absolute terms compared to the last transmission for an ALARM transmission to be triggered. This transmission is carried out independently of the normal transmission interval.

Resource: TEMPERATURE UPPER LIMIT
ID: 0x02
Key (NFC/BLE): tht
Min value: 0
Max value: 85
Default value: 40
Unit: °C
Module key: 1111
Description: Specifies the upper absolute limit value at which an alarm is triggered.

Resource: TEMPERATURE LOWER LIMIT
ID: 0x03
Key (NFC/BLE): tlt
Min value: -25
Max value: 75
Default value: 0
Unit: °C
Module key: 1111
Description: Specifies the lower absolute limit value at which an alarm is triggered.

Resource: REL. HUMIDITY DELTA
ID: 0x04
Key (NFC/BLE): hdt
Min value: 1
Max value: 80
Default value: 20
Unit: %RH
Module key: 1111
Description: Specifies by how much the relative humidity must change in absolute terms compared to the last transmission for an ALARM transmission to be triggered. This transmission is carried out independently of the normal transmission interval.

Resource: REL. HUMIDITY UPPER LIMIT VALUE
ID: 0x05
Key (NFC/BLE): hht
Min value: 5
Max value: 100
Default value: 80
Unit: %RH
Module key: 1111
Description: Specifies the upper absolute limit value at which an alarm is triggered.

Resource: REL. HUMIDITY LOWER LIMIT VALUE
ID: 0x06
Key (NFC/BLE): hlt
Min value: 0
Max value: 95
Default value: 20
Unit: %RH
Module key: 1111
Description: Specifies the lower absolute limit value at which an alarm is triggered.

Resource: HYSTERESE REL. AIR FLUID
ID: 0x07
Key (NFC/BLE): thy
Min value: 5
Max value: 0
Default value: 30
Unit: °C
Module key: 1111
Description: Determines the absolute hysteresis in °C for state changes. If the temperature falls below or exceeds a threshold value minus hysteresis, the system switches from a higher to a lower alarm status.

Resource: HYSTERESIS TEMPERATURE
ID: 0x08
Key (NFC/BLE): hhy
Min value: 2
Max value: 0
Default value: 10
Unit: %RH
Module key: 1111
Description: Determines the absolute hysteresis in %RH for status changes. If the relative humidity falls below or exceeds a threshold value minus hysteresis, the system switches from a higher to a lower alarm status.

Group: Tracking on Activity Settings (0x01)
Defines measurement thresholds for triggering the Tracking on Activity feature and other tracking-related settings.

Resource: MOVE MODE
ID: 0x00
Key (NFC/BLE): lmode
Min value: 0
Max value: 7
Default value: 6
Unit: —
Module key: 1111
Description: Indicates whether Tracking on Activity mode is activated:
• 0: No Tracking on Activity feature active
• 1: Tracking on Start: Localization is carried out when an activity is detected.
• 2: Tracking on Ongoing: Localization is carried out during an ongoing activity.
• 3: Tracking on Start and Ongoing: Localization is carried out when an activity is detected and while an activity is already running.
• 4: Tracking on Inactivity: When an activity is finished, localization is carried out.
• 5: Tracking on Start and Inactivity: Localization is carried out when an activity is detected and when an activity ends.
• 6: Tracking on Inactivity and Ongoing: Localization takes place when the activity is in progress and when the activity has ended.
• 7: Tracking on Start, Inactivity and Ongoing: Localization takes place when the activity starts, is in progress, and has ended.

Resource: MOVE ACTIVITY THRESHOLD
ID: 0x01
Key (NFC/BLE): moat
Min value: 100
Max value: 2000
Default value: 400
Unit: mg
Module key: 1111
Description: Describes the acceleration from which an activity is counted and recorded as an activity.

Resource: MOVE ONGOING TIME
ID: 0x02
Key (NFC/BLE): mont
Min value: 1
Max value: 1440
Default value: 10
Unit: min
Module key: 1111
Description: Specifies the time that elapses between two transmissions and localizations while an activity is ongoing.

Resource: MOVE INACTIVITY TIME
ID: 0x03
Key (NFC/BLE): moit
Min value: 1
Max value: 1440
Default value: 5
Unit: min
Module key: 1111
Description: Describes the time between the point at which an activity ends and the localization/transfer of the data.

Resource: MOVE IMPACT MAX
ID: 0x04
Key (NFC/BLE): miom
Min: 1
Max: 1440
Factory setting: 4
Unit: —
Module key: 1111
Description: Number of impacts allowed before a vandalism alarm is triggered, unless the “Move Inactivity Time” expires between impacts.

Specifications subject to change without notice. All information provided without guarantee.