Juno ID TILT NFC and Downlink description

📄 You can view the PDF above or download it here.

NFC Configuration Modules

Module	Module Key	Group	Group ID	Description
Sentiface	0x1XXX	Timings	0x00	Defines parameters for measurements and transmission behavior
Sentiface	0x1XXX	Settings for opening detection	0x02	Defines measurement thresholds for triggering the alarm for temperature and relative humidity
Sentiface	0x1XXX	Settings for tilt detection	0x03	Defines the behavior of the acceleration sensor

Tables for cross-product modules (Senticom/Sentivisor) can be found in the Generic NFC and Downlink documentation.
Further information on configuring sensor communication can be found in the respective generic LoRaWAN® or mioty® documentation, depending on the version

Applicable Article Codes

Article Code	Features
S-JUNO-LOEU-ID	JUNO tilt sensor, tilt detection and opening detection LoRaWAN®
S-JUNO-IX-LOEU-ID	INDUSTRIAL JUNO tilt sensor, tilt detection and opening detection LoRaWAN®
S-JUNO-MIOTY-ID	JUNO tilt sensor, tilt detection and opening detection mioty®
S-JUNO-IX-MIOTY-ID	INDUSTRIAL JUNO tilt sensor, tilt detection and opening detection mioty®

SENTIFACE: GROUP TIMINGS 0x00

Resource	ID	Key (NFC/BLE)	Min	Max	Factory setting	Unit	Module key
MEASUREMENT PERIOD	0x00	period	1/5*	360	30	min	1111
Specifies the period in which the measured values are recorded. 5 minutes means that a measurement is always taken by the sensor after 5 minutes.
REGULAR TRANSMISSION INTERVAL	0x01	every	1	64	6		1111
Number of measurements performed up to transmission.

* 5: For version S-JUNO-LOEU-ID and S-JUNO-MIOTY-ID
* 1: For version S-JUNO-IX-LOEU-ID and S-JUNO-IX-MIOTY-ID

SENTIFACE: OPENING DETECTION GROUP 0x02

Property	Property ID	Key (NFC/BLE)	Min	Max	Default	Unit	Module Key
OPENING COOLDOWN	0x00	acool	0	600	0	sec	1111
Specifies a period of time in which, after the triggering of an opening, further opening cannot be triggered (debounces the openings). The reference value is the last counted opening.
OPENING TIME ALARM	0x01	oaaf	5	2880	10	min	1111
Indicates how long the lid is open until an alarm is triggered.
OPENING MODE	0x02	opmo	0	8	1		1111
Describes which direction the sensor is facing when it is closed and which angles are defined for opening detection. Face up describes the status when the sensor is lying on the table and looking up at the ceiling. Settings from 0 to 7 with acceleration sensor, 8 and 9 Hall sensor: • 0: off • 1: Ultra low power. Fixed threshold value 50°. Closed when directed downwards (face down). • 2: Ultra low power. Fixed threshold value 50°. Closed when directed upwards (face up). • 3: Ultra low power. Fixed threshold value 50°. Closed when directed to the side (sidewards). • 4: Extended tilt sensing. Adjustable threshold value. Closed when directed downwards (face down). • 5: Extended tilt sensing. Adjustable threshold value. Closed when directed upwards (face up). • 6: Extended tilt sensing. Adjustable threshold value. Closed when directed sideways. • 7: Extended tilt sampling. Adjustable threshold value. Automatic calibration of the closed alignment. • 8: Container is closed when solenoid is applied. • 9: Container is open when solenoid is applied.

SENTIFACE: ADVANCED INCLINATION SETTINGS GROUP 0x03

Property	Property ID	Key (NFC/BLE)	Min	Max	Default	Unit	Module Key
SAMPLING PERIOD	0x00	tspe	2	600	2	s	1111
Specifies how often the acceleration sensor determines the angle. The higher the frequency, the higher the power consumption.
TRIGGER LEVEL	0x01	ttle	5	180	20	°	1111
Specifies the angle from which an opening is counted or an alarm is triggered.
TRIGGER HYSTERIA	0x02	tthy	1	90	4	°	1111
Hysteresis value for the opening angle.

Plain Text Information

Group: Timings (0x00)
Defines parameters for measurements and transmission behavior.

Resource: MEASUREMENT PERIOD
ID: 0x00
Key (NFC/BLE): period
Min value: 1/5*
Max value: 360
Default value: 30
Unit: min
Module key: 1111
Description: Specifies the period in which the measured values are recorded. 5 minutes means that a measurement is always taken by the sensor after 5 minutes.

5: For version S-JUNO-LOEU-ID and S-JUNO-MIOTY-ID
1: For version S-JUNO-IX-LOEU-ID and S-JUNO-IX-MIOTY-ID

Resource: REGULAR TRANSMISSION INTERVAL
ID: 0x01
Key (NFC/BLE): every
Min value: 1
Max value: 64
Default value: 6
Unit: —
Module key: 1111
Description: Number of measurements performed up to transmission.

Group: Opening Detection (0x02)
Defines parameters for detecting and debouncing “opening” events and triggering alarms based on lid angle/time.

Resource: OPENING COOLDOWN
ID: 0x00
Key (NFC/BLE): acool
Min value: 0
Max value: 600
Default value: 0
Unit: sec
Module key: 1111
Description: Specifies a period of time in which, after the triggering of an opening, further openings cannot be counted (debounces the openings). The reference value is the last counted opening.

Resource: OPENING TIME ALARM
ID: 0x01
Key (NFC/BLE): oaaf
Min value: 5
Max value: 2880
Default value: 10
Unit: min
Module key: 1111
Description: Indicates how long the lid must remain open before an alarm is triggered.

Resource: OPENING MODE
ID: 0x02
Key (NFC/BLE): opmo
Min value: 0
Max value: 8
Default value: 1
Unit: —
Module key: 1111
Description: Defines which sensing mode and angle thresholds are used to detect open/closed status. “Face up” means the sensor is lying on a flat surface, looking at the ceiling. Modes:
• 0: Off
• 1: Ultra low power, fixed 50° threshold; closed when facing down (face down)
• 2: Ultra low power, fixed 50° threshold; closed when facing up (face up)
• 3: Ultra low power, fixed 50° threshold; closed when facing sideways
• 4: Extended tilt sensing, adjustable threshold; closed when facing down (face down)
• 5: Extended tilt sensing, adjustable threshold; closed when facing up (face up)
• 6: Extended tilt sensing, adjustable threshold; closed when facing sideways
• 7: Extended tilt sensing, adjustable threshold; automatic calibration of closed alignment
• 8: Hall-sensor mode: container is closed when solenoid is energized

Group: Advanced Inclination Settings (0x03)
Defines fine-tuning parameters for the acceleration-based inclination sensor.

Resource: SAMPLING PERIOD
ID: 0x00
Key (NFC/BLE): tspe
Min value: 2
Max value: 600
Default value: 2
Unit: s
Module key: 1111
Description: Specifies how often the acceleration sensor measures angle. Higher sampling rates increase power consumption.

Resource: TRIGGER LEVEL
ID: 0x01
Key (NFC/BLE): ttle
Min value: 5
Max value: 180
Default value: 20
Unit: °
Module key: 1111
Description: Specifies the angle at which an opening event is registered or an alarm is triggered.

Resource: TRIGGER HYSTERESIS
ID: 0x02
Key (NFC/BLE): tthy
Min value: 1
Max value: 90
Default value: 4
Unit: °
Module key: 1111
Description: Hysteresis margin for the opening angle, preventing rapid toggling around the trigger threshold.

Specifications subject to change without notice. All information provided without guarantee.