Neptun R/U
      Back to home
      1. Help-Desk
      2. Sensors & Product Lines
      3. Neptun R/U

      Neptune Level Sensor Payload Description

      You are looking for the payload description for the Neptune level sensor?

      Neptun Payload Decoder LoRaWAN®

      Here you will find the payload description for the Neptun water level sensor.

      Here you will find the table for a clear presentation:

      🔽🔽

       

      Byte: 1-2
      Alias: Module key
      Designation: module_key
      Valid for versions: All - base payload, valid and available for all sensors of the Apollon-Q-T/R/TR(-ACC)(-HALL) series
      Description:
      Byte 1

      • 4-bit MSB: Module code. For Mioty exclusively "Sentiface" telemetry module, i.e. always 0x1.
      • 4 bit LSB: Major version. FW of the same major version but larger minor version remain compatible with older decoders. However, the number of bytes may change!

      Byte 2

      •  bit MSB: Minor version. New SW versions may incrementally add new telemetry to the data packet.
      • 4 Bit LSB: Sub / Product Version. With Helios, these bits encode the specific configuration of connected sensors.

      Byte: 3
      Alias: Uplink Counter
      Designation:  uplink_counter
      Valid for versions: Alle - base payload, valid and available for all sensors of the Apollon-Q-T/R/TR(-ACC)(-HALL) series
      Description: Protocol-independent uplink counter that reaches a maximum
      up to 255. After that, the counter starts again at 0.

      Byte: 5
      Alias: Internal temperature
      Designation:  internal_temperature
      Valid for versions: Alle - base payload, valid and available for all sensors of the Apollon-Q-T/R/TR(-ACC)(-HALL) series
      Description: Internal temperature of the sensor + 128//Temp. in °C internal_temperature: dataBytes[5] - 128,

      Byte: 6
      Alias: Alarm variable
      Designation:  alarm
      Valid for versions: Alle - base payload, valid and available for all sensors of the Apollon-Q-T/R/TR(-ACC)(-HALL) series
      Description: 

      Uplink was caused by an alarm.

      • 0: Alarm not triggered
      • 1: Alarm triggered
      • 1 set if one of the alarm variables fails (is formed from the logical OR of all alarm variables) Opening alarm deactivated by default!

      For versions: NEPT-XXXX-R/U

      Byte: 7-8
      Alias:  Master measured value
      Designation: max_peak
      Valid for versions: for all sensors in the series: NEPT-XXXX-R/U
      Description: Returns the distance with the largest peak, i.e. with the greatest signal strength or to the next target, depending on the setting of rsort

      Byte: 9
      Alias: Measurement status
      Designation:  detection_success
      Valid for versions: for all sensors in the series: NEPT-XXXX-R/U
      Description:

      Status of the sensor in relation to the last measured value

      • 1: Successful
      • 0: Error

      Byte: 10
      Alias: No. of Peaks
      Designation: radar_no_peaks
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Number of peaks detected

      Byte: 11-12
      Alias: Distance 1
      Designation: rd1
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Distance with maximum peak in mm

      Byte: 13-14
      Alias: Peak 1
      Designation: ra1
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Size of the peak 1

      Byte: 15-16
      Alias: Distance 2
      Designation: rd2
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Distance with 2nd highest peak in mm

      Byte: 17-18
      Alias: Peak 2
      Designation: ra2
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Size of the peak 2

      Byte: 19-20
      Alias: Distance 3
      Designation: rd3
      Valid for versions: for all sensors in the series NEPT-XXXX-R
      Description: Distance with 3nd highest peak in mm

      Byte: 21-22
      Alias: Peak 3
      Designation: ra3
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Size of the peak 3

      Byte: 23-24
      Alias: Distance 4
      Designation: rd4
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Distance with 4nd highest peak in mm

      Byte: 25-26
      Alias: Peak 4
      Designation: ra4
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Size of the peak 4

      Byte: 27-28
      Alias: Distance 5
      Designation: rd5
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Distance with 5nd highest peak in mm

      Byte: 29-30
      Alias: Peak 5
      Designation: ra5
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Size of the peak 5

      Byte: 31-32
      Alias: Distance 6
      Designation: rd6
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Distance with 6nd highest peak in mm

      Byte: 33-34
      Alias: Peak 6
      Designation: ra6
      Valid for versions: for all sensors in the series: NEPT-XXXX-R
      Description: Size of the peak 6

      For versions: NEPT-XXXX-R-ACC

      Byte: 1 Byte (appended)
      Alias: Vandalism
      Designation: acc_impact
      Valid for versions: for all sensors in the series: NEPT-XXXX-R-ACC
      Description:

      Indicates whether a case of vandalism is acute or not not

      • 0: Everything OK
      • 1: Vandalism case displayed