Febris CO2 NFC and Downlink Description

Looking for the Febris CO2 NFC and downlink description?

Here you will find the Febris CO2 NFC and downlink description.

Febris_1


Timings and Alarms Group 


Name: Measurement Period 
Communication Protocol: All
Description: Specifies the period in which measurement values are recorded. A setting of 10 minutes means that the sensor takes a measurement every 10 minutes.
Key (NFC Parameter): period
Module: Sentiface
Module Key: 0x1111
Group: 0x00
Property ID: 0x00
Default Value: 5
Minimum Adjustable Value: 1
Maximum Adjustable Value: 60
Unit: min
Read/Write: rw
Module Key: 1111


Name: Regular Transmission Interval
Communication Protocol: All
Description: Defines the number of measurements after which the sensor schedules an uplink, even if no alarm condition occurs.

Key ( NFC/BLE): every 
Module: Sentiface
Module Key: 0x1111
Group: 0x00
Property ID: 0x01
Preset Value: 6
Minimum Adjustable Value: 1
Maximum Adjustable Value: 64
Unit: count 
Read/Write: rw
Module Key: 1111


Name: Store and Transmit Values (Feature to be used only upon consultation) 
Communication Protocol: All 
Description: Specifies whether past measurement values should also be transmitted: (starting from Minor Version 1.2) 
  • o: Off
  • 1: On
Key (NFC/BLE): pasten   

Module: Sentiface 
Module Key: 0x1121 
Group: 0x00 
Property ID: 0x02 
Default Value:
Minimum Adjustable Value:
Maximum Adjustable Value:
Unit: 
Read/Write: rw 
Module Key: 1121 


 Name: Number of Stored Values (Feature to be used only upon consultation) 
Communication Protocol: All 
Description: Defines the maximum number of past measurement values to be transmitted in a single transmission. The actual number depends on the technology used (starting from Minor Version 1.2). 
Key (NFC Parameter): pastnum 
Module: Sentiface 
Module Key: 0x1121 
Group: 0x00 
Property ID: 0x02 
Default Value: Max (30/6) 
Minimum Adjustable Value: 1 
Maximum Adjustable Value: 30 NB-IoT / 6 LoRaWAN 
Unit: 
Read/Write: rw 
Module Key: 1121 


Alarm Settings Group 


Name: Delta Value
Communication Protocol: All
Description: Specifies the absolute change in CO2 value required compared to the last transmission to trigger an ALARM transmission. This transmission occurs independently of the normal transmission interval.
Key (NFC Parameter): delta
Module: Sentiface
Module Key: 0x1111
Group: 0x01
Property ID: 0x00
Preset Value: 300
Minimum Adjustable Value: 300
Maximum Adjustable Value: 2000
Unit: ppm
Read/Write: rw
Module Key: 1111
Name: Yellow Alarm Threshold 
Communication Protocol: All 
Description: Specifies the CO2 threshold in ppm that must be exceeded for the sensor to switch to the yellow state (yellow LED lights up). 
Key (NFC Parameter): yellow 
Module: Sentiface 
Module Key: 0x1111 
Group: 0x01 
Property ID: 0x01 
Default Value: 1000 
Minimum Adjustable Value: 500 
Maximum Adjustable Value: 3000 
Unit: ppm 
Read/Write: rw 
Module Key: 1111
Name: Red Alarm Threshold
Communication Protocol: All
Description: Specifies the CO2 threshold in ppm that must be exceeded for the sensor to switch to the red state (red LED lights up).
Key (NFC Parameter): red
Module: Sentiface
Module Key: 0x1111
Group: 0x01
Property ID: 0x02
Preset Value: 2000
Minimum Adjustable Value: 500
Maximum Adjustable Value: 3000
Unit: ppm
Read/Write: rw
Module Key: 1111
Name: Hysteresis
Communication Protocol: All
Description: Defines the absolute hysteresis in ppm for state transitions. If the CO2 concentration falls below a threshold minus the hysteresis, the alarm state switches from a higher to a lower level.
Key (NFC Parameter): hyst
Module: Sentiface
Module Key: 0x1111
Group: 0x01
Property ID: 0x03
Preset Value: 5
Minimum Adjustable Value: 0
Maximum Adjustable Value: 300
Unit: ppm
Read/Write: rw
Module Key: 1111

 Buzzer Group 


 Name: Buzzer Settings 
Communication Protocol: All 
Description: Defines the behavior of the buzzer. 
  • 0: Buzzer off 
  • 1: Buzzer sounds when alarm level changes across defined thresholds 
  • 2: Always on in case of alarm (if the sensor remains in yellow or red state, the buzzer continuously signals the state at each measurement) 
  • 3: Buzzer only sounds when switching to the red state 
  • 4: Buzzer remains active as long as the red state persists. 

Key (NFC Parameter): buzz 
Module: Sentiface 
Module Key (NFC/BLE): 0x1111 
Group: 0x02 
Property ID: 0x00 
Default Value: 1 
Minimum Adjustable Value: 0 
Maximum Adjustable Value: 4 
Unit: 
Read/Write: rw

Module Key: 1111


Tap Settings 


Name: Tap Dtect enable 
Communication Protocol: All
Description: Enables the double tap function :
  • 0: Double tap off
  • 1: Double tap on
Key (NFC Parameter): tapen
Module: Sentiface
Module Key (NFC/BLE): 0x1111
Group: 0x03
Property ID: 0x00
Default Value: 1
Minimum Adjustable Value: 0
Maximum Adjustable Value: 1
Unit:
Read/Write: rw
Module Key: 1111

Name: Double tap Max delta
Communication Protocol: All 
Description: The maximum time allowed between the two "taps" for a measurement to be triggered and the double tap to be successfully registered. 
Key (NFC Parameter): tapdelt 
Module: Sentiface 
Module Key (NFC/BLE): 0x1111 
Group: 0x03 
Property ID: 0x01 
Default Value: 800 
Minimum Adjustable Value: 100 
Maximum Adjustable Value: 2000 
Unit: sec 
Read/Write: rw 
Module Key: 1111 


Name: Tap count alarm 
Communication Protocol: All
Description: Specifies how many taps are needed to trigger a measurement:
  • 2: 2 taps (double tap)
  • 3: 3 taps (triple tap)
  • 4: 4 taps (quadro tap)
Key (NFC Parameter): tapcnt
Module: Sentiface
Module Key : 0x1111
Group: 0x03
Property ID: 0x02
Default Value: 2
Minimum Adjustable Value: 2
Maximum Adjustable Value: 4
Unit:
Read/Write: rw
Module Key: 1111

Name: Tap impact strength
Communication Protocol: All
Description: Once the acceleration exceeds the set tap_impact_strength value, a measurement (double tap) is triggered.
Key (NFC Parameter): tapstr
Module: Sentiface
Module Key : 0x1111
Group: 0x03
Property ID: 0x03
Default Value: 400
Minimum Adjustable Value: 200
Maximum Adjustable Value: 2000
Unit: mg
Read/Write: rw
Module Key: 1111


Name: Double Tap Cooldown
Communication Protocol: All
Description: Defines the cooldown period after a measurement (double tap) is triggered, during which another measurement cannot be triggered.
Key (NFC Parameter): tapcool
Module: Sentiface
Module Key: 0x1111
Group: 0x03
Property ID: 0x04
Preset Value: 30
Minimum Adjustable Value: 10
Maximum Adjustable Value: 300
Unit: sec
Read/Write: rw
Module Key: 1111

LED settings Group 


Name: LED Settings
Communication Protocol: All
Description: Defines the behavior of the LEDs:
  • 0: All LEDs on
  • 1: All LEDs off
Key (NFC Parameter): leds
Module: Sentiface
Module Key (NFC/BLE): 0x1111
Group: 0x04
Property ID: 0x04
Default Value: 1
Minimum Adjustable Value: 0
Maximum Adjustable Value: 1
Unit:
Read/Write: rw
Module Key: 1111

Data source and humidity alarm Group 


Name: Alarm Data Source 
Communication Protocol: All 
Description: Specifies the source that triggers the alarm, such as CO2, temperature, or relative humidity. 
  • 0: CO2 Sensor 
  • 1: Relative Humidity Sensor 
Key (NFC Parameter): ads 
Module: Sentiface 
Module Key : 0x1111 
Group: 0x05 
Property ID: 0x00 
Default Value:
Minimum Adjustable Value:
Maximum Adjustable Value: 2 
Unit: 
Read/Write: rw 
Module Key: 1111
Name: Relative Humidity Delta 
Communication Protocol: All 
Description: Specifies how much the relative humidity value must change compared to the last transmission to trigger an ALARM transmission. This transmission occurs independently of the normal transmission interval. 
Key (NFC Parameter): hdt 
Module: Sentiface 
Module Key : 0x1111 
Group: 0x05 
Property ID: 0x01 
Preset Value: 20 
Minimum Adjustable Value:
Maximum Adjustable Value: 100 
Unit:
Read/Write: rw 
Module Key: 1111
Name: Relative Humidity Yellow Alarm 
Communication Protocol: All 
Description: Specifies the relative humidity threshold in %, which must be exceeded for the sensor to switch to the yellow state (yellow LED lights up). 
Key (NFC Parameter): hyt 
Module: Sentiface 
Module Key: 0x1111 
Group: 0x05 
Property ID: 0x02 
Default Value: 20 
Minimum Adjustable Value: 50 
Maximum Adjustable Value: 100 
Unit: % 
Read/Write: rw 
Module Key: 1111
Name: Relative Humidity Red Alarm 
Communication Protocol: All 
Description: Specifies the relative humidity threshold in %, which must be exceeded for the sensor to switch to the red state (red LED lights up). 
Key (NFC Parameter): hrt 
Module: Sentiface 
Module Key : 0x1111 
Group: 0x05 
Property ID: 0x03 
Default Value: 80 
Minimum Adjustable Value: 10 
Maximum Adjustable Value: 100 
Unit:
Read/Write: rw 

Module Key: 1111


 Name: Relative Humidity Hysteresis 
Communication Protocol: All 
Description: Defines the absolute hysteresis in %, when transitioning between states. If the relative humidity concentration drops below a threshold minus the hysteresis, the alarm state switches from a higher to a lower level. 
Key (NFC Parameter): hlh 
Module: Sentiface 
Module Key : 0x1111 
Group: 0x05 
Property ID: 0x04 
Preset Value:
Minimum Adjustable Value:
Maximum Adjustable Value: 300 
Unit:
Read/Write: rw 
Module Key: 1111


ou can download the NFC and downlink description for Febris CO2 here: Febris CO2 NFC and Downlink Description

Documentation Links

The links for the other Febris CO2 documentation can be found here: